International Journals

2021

[Corresponding author]
Tae Geon kim, Do Sik Shim, “Effect of laser power and powder feed rate on interfacial crack and mechanical/microstructural characterizations in repairing of 630 stainless steel using direct energy deposition,“ Materials Science & Engineering A, vol. 828, 142004

Link

[First/Corresponding author]
Do Sik Shim, “Effects of process parameters on additive manufacturing of aluminum porous materials and their optimization using response surface method,“ Journal of Materials Research and Technology, vol. 15, 119-134

Link

[Co-author]
Seulbi Lee, Jae Hyun Yu, Sang-Hu Park, Do-Sik Shim, Yoon Suk Choi, “Effect of carbon content in steel powder feedstock on impact toughness and microstructure of additively manufactured cast iron by directed energy deposition,“ Journal of Materials Research and Technology, vol. 15, 189-198

Link

[Corresponding author]
Ye eun Jeong, Gwang Yong Shin, Do Sik Shim, “Effect of P21 buffer layer on interfacial bonding characteristics of high carbon tool steel hardfaced through directed energy deposition,“ Journal of Manufacturing Processes, vol. 68, 1596-1614

Link

[Corresponding author]
Chanjin Kim, Sanghu Park, Youngsik Pyoun, Do Sik Shim, “Effects of Ultrasonic Nanocrystal Surface Modification on Mechanical
Properties of AISI D2 Steel,“ International Journal of Precision Engineering and Manufacturing, vol. 22, 1271-1284

Link

[First/Corresponding author]
Do Sik Shim, Hyub Lee, Yong Son, Wook Jin Oh, “Effects of pre- and post-repair heat treatments on microstructure and tensile behaviors of 630 stainless steel repaired by metal additive manufacturing,“ Journal of Materials Research and Technology, vol. 13, 980-999

Link

[Corresponding author]
Seung Young Cho, Min Seob Kim, Youngsik Pyoun, Do Sik Shim, “Strategy for Surface Post Processing of AISI 316L Additively Manufactured by Powder Bed Fusion Using Ultrasonic Nanocrystal Surface Modification,“ Metals, vol. 11, 843

Link

[Co-author]
Junyeop Lee, Ye-eun Jeong, Do-sik Shim, Eunkyung Lee, “Microstructural evolution and martensitic transformation in FeCrV alloy fabricated via additive manufacturing,“ Materials Science & Engineering A, vol. 809, 140943

Link

[Corresponding author]
Ye Eun Jeong, Jun Yeop Lee, Eun Kyung Lee, Do Sik Shim, “Microstructures and Mechanical Properties of Deposited Fe-8Cr-3V-2Mo-2W on SCM420 Substrate Using Directed Energy Deposition and Effect of Post-Heat Treatment,“ Materials, vol. 14, 1231

Link

[Co-author]
Yeong Kwan Jo, Yeong Wook Gil, Do Sik Shim, Young Sik Pyun, Sang Hu Park, “Control of Local Hardness Gradient of Metal Surface by Inclined Surface Treatment Using Ultrasonic Nanocrystal Surface Modification,“ International Journal of Precision Engineering and Manufacturing-Green Technology, vol. 8, 533-546

Link
2020

[Corresponding author]
Min Seob Kim, Sang Hu Park, Young Sik Pyun, Do Sik Shim, “Optimization of ultrasonic nanocrystal surface modification for surface quality improvement of directed energy deposited stainless steel 316L,“ Journal of Materials Research and Technology, vol. 9, no. 6, 15102-15122

Link

[Co-author]
Yeong-Kwan Jo, Jae-Hyun Yu, Ki-Yong Lee, Do-Sik Shim and Sang-Hu Park, “Control of crack propagation on SUS316 plate by laser-induced patterning: heat treatment and cladding," Journal of Mechanical Science and Technology, vol. 34, no. 11, 4711-4719

Link

[Co-author]
Taehwan Kim, Gyeong Yun Baek, Jong Bae Jeon, Ki-Yong Lee, Do-sik Shim, and Wookjin Lee, “Effect of laser rescanning on microstructure and mechanical properties of direct energy deposited AISI 316L stainless steel,” Surface and Coatings Technology, 405, 126540

Link

[Co-author]
Kyeongsik Ha, Young Keun Park, Taehwan Kim, Gyeong Yun Baek,
Jong Bae Jeon, Do-sik Shim, Young Hoon Moon, and Wookjin Lee, “Effects of Heat Treatment Condition and Counter Materials on the Wear Behavior of Laser Direct Energy Deposited Fe-8Cr-3V-2Mo-2W Alloy,” Korean Journal of Metals and Materials, vol. 58, no. 10, 680-692

Link

[Corresponding author]
Wook Jin Oh, Yong Son, Do Sik Shim*, “Effect of in-situ heat treatments on deposition characteristics and mechanical properties for repairs using laser melting deposition,“ Journal of Manufacturing Processes, vol. 58, pp.1019-1033

Link

[Corresponding author]
Wook Jin Oh, Yong Son, Seung Yeong Cho, Seung Weon Yang, Gwang Yong Shin, Do Sik Shim*, “Solution annealing and precipitation hardening effect on the mechanical properties of 630 stainless steel fabricated via laser melting deposition,“ Materials Science & Engineering A, vol. 794, pp.139999

Link

[Corresponding author]
Jong Youn Son, Gwang Yong Shin, Ki Yong Lee, Hee Seok Yoon, Do Sik Shim*, Deposition characteristics of high-thermal-conductivity steel in the direct energy deposition process and its hardness properties at high temperatures, Archives of Metallurgy and Materials, vol. 65, no. 4, pp.1365-1369

Link

[Co-author]
Kyeongsik Ha, Taehwan Kim, Gyeong Yun Baek, Jong Bae Jeon, Do-sik Shim, Young Hoon Moon, Wookjin Lee*, “Numerical study of the effect of progressive solidification on residual stress in single-bead-on-plate additive manufacturing,” Additive Manufacturing, vol. 34, pp. 101245

Link

[Corresponding author]
Gyeong Yun Baek, Gwang Yong Shin, Ki Yong Lee* and Do Sik Shim*, “Effect of Post-Heat Treatment on the AISI M4 Layer Deposited by Directed Energy Deposition,” Metals, vol. 10, pp.703

Link

[Co-author]
Seulbi Lee, Jaewoong Kim, Do‑Sik Shim, Sang‑Hu Park, Yoon Suk Choi*, Micro‑Cracking in Medium‑Carbon Steel Layers Additively Deposited on Gray Cast Iron Using Directed Energy Deposition, Metals and Materials International, vol. 26, no. 5, pp.708-718

Link

[Corresponding author]
Min-seob Kim, Wook-jin Oh, Gyeong-yoon Baek, Yeong-kwan Jo, Ki-yong Lee, Sang-hu Park, Do-sik Shim*, “Ultrasonic Nanocrystal Surface Modification of High-speed Tool Steel (AISI M4) Layered via Direct Energy Deposition,”J. of Materials Processing Technology, vol.277, pp.116420

Link

[Corresponding author]
Jong Youn Son, Hee Seok Yoon, Ki Yong Lee, Sang Hu Park, Do Sik Shim*, Investigation into high-temperature interfacial strength of heat-resisting alloy deposited by laser melting process, Metals and Materials International, vol. 26, pp.384-394

Link

[Corresponding author]
Wook Jin Oh, Jong Youn Son, Gyeong Yun Baek, Do Sik Shim*, “Excess deposition for suppressing interfacial defects induced on parts repaired using direct energy deposition,“ International Journal of Advanced Manufacturing Technology, vol. 106, pp.1303-1316

Link

[Co-corresponding author]
Jae-Hyun Yu, Ki Yong Lee, Do-Sik Shim* and Sang-Hu Park, “Characterization of mechanical behavior in repaired FC300 using directly deposited AISI-P21 and AISI-H13 metal powders,” Journal of Engineering, Manufacture, vol.234, 157-169

Link
2019

[Corresponding author]
Wook Jin Oh, Yong Son, Do Sik Shim*, “Effect of In-situ Post Heating on Repairing STS316L built by Laser Powder Bed Fusion using Direct Energy Deposition,” Korean Journal of Metals and Materials, vol.57, no.8, 543-553


Link

[Co-corresponding author]
Min-Seob Kim, Young-KwanCho, Sang-Hu Park*, Do-Sik Shim*, “Application of Ultrasonic Nanocrystal Surface Modification for Improving Surface Profile of DEDed AISI 316L,” Journal of Mechanical Science and Technology, vol.33, no.12, 5659-5667

Link

[Co-corresponding author]
Jiwon Lee, Hongkeun Yoon, Yeonju Park, Kyusuk Choi, Chunwoo Lee, Dosik Shim* and Sanghu Park*, “Design and fabrication of fluid flow characteristic controllable trawl door using a trailing edge flap,” Journal of Mechanical Science and Technology, vol.33, no.12, 5623-5630

Link

[Corresponding author]
Wook Jin Oh, Wook Jin Lee, Min Seob Kim, Jong Bae Jeon, Do Sik Shim*, Repairing additive-manufactured 316L stainless steel using direct energy deposition, Optics and Laser Technology, vol.117, 6-17

Link

[Corresponding author]
Gyeong Yun Baek, Gwang Yong Shin, Ki Yong Lee, Do-Sik Shim*, Mechanical properties of tool steels with high wear resistance deposited via laser melting deposition, Metals, vol.9, no.282, 1-15

Link

[Corresponding author]
Ja-Ye Seo and Do-Sik Shim*, “Compressive Behavior of Porous Materials Fabricated by Laser Melting Deposition using AlSi12 Powder and Foaming Agent,” Materials Research Express, vol.6, no.6

Link

[First/Corresponding author]
Do-Sik Shim*, Ki-Yong Lee, Sang-Hu Park, Bending strength of tool steel preheated to various temperatures and layered by laser melting, Materials Science & Engineering-A, vol. 744, 548-559

Link

[Co-corresponding author]
Jae hyun Yu, Ki Yong Lee, Do-Sik Shim*, Sang hu Park*, Metal embedding and ultrasonic nanocrystal surface modification technology for super wear-resistant mechanical parts, International Journal of Advanced Manufacturing Technology, vol.101, 951—962

Link
2018

[First/Corresponding author]
Do-Sik Shim*, Ja-Ye Seo, Wook-Jin Oh, Additive Manufacturing of Porous Metals using Laser Melting of Ti6Al4V powder with a Foaming Agent, Materials Research Express, vol. 5, 1-10

Link

[Corresponding author]
Gyeong Yun Baek, Gwang Yong Shin, Ki Yong Lee, Do-Sik Shim*, A Study on Micro-Structure and Wear Behavior of AISI M4 and CPM15V Deposited by Laser Melting, Korean Journal of Metals and Materials, vol. 56, no. 6, 430-439

Link

[Co-corresponding author]
Jae hyun Yu, Yoon Suk Choi, Do-Sik Shim*, Sang hu Park*, Repairing casting part using laser assisted additive metal-layer deposition and its mechanical properties, Optics & Laser Technology, vol.106, 87-93

Link

[First/Corresponding author]
Do-Sik Shim*, Ja-Ye Seo, Fabrication of Porous Metals Layered by Laser-Assisted Melting of Sprayed Ti6Al4V Powder and Foaming Agent Mixture, Materials Letters, vol. 219, 243-246

Link

[Corresponding author]
Ja-Ye Seo and Do-Sik Shim*, “Effect of track spacing on porosity of metallic foam fabricated by laser melting deposition of Ti6Al4V/TiH2powder mixture,” Vacuum, vol. 154, 200-207

Link

[Corresponding author]
Jin-Seon Seo, Ki-Yong Lee, Do-Sik Shim*, "Effects of process parameters on properties of porous foams formed by laser-assisted melting of st eel powder (AISI P21)/foaming agent (ZrH2) mixture," Optics & Laser Technology, vol. 98, 326-338

Link

[Co-author]
Sung-Min Hong, Hyeon-Seok Kang, Do-Sik Shim, Hyeung-Sik Choi and Joon-Young Kim, “Dynamics modeling and structural analysis of underwater construction robot,” Int. J. of Modern Phisics B, vol. 32, no. 19, 1-6



Link
2017

[Co-author]
Sung-Moon Yang, Ho-Seong Ji, Do-Sik Shim, Joon-Ho Baek, and Sang-Hu Park, “Conical Roll-Twist-Bending Process for Fabrication of Metallic Archimedes Spiral Blade Used in Small Wind Power Generator,” Int. J. of Precision Engineering and Manufacturing-Green Technology, vol. 4, no. 4, 431-439

Link

[First/Corresponding author]
Do Sik Shim*, Gyeong Yun Baek, Eun Mi Lee, “Effect of substrate preheating by induction heater on direct energy deposition of AISI M4 powder,” Materials Science & Engineering-A (IF 3.094), vol. 682, pp.550-562

Link

[Corresponding author]
Gyeong Yun Baek, Gwang Yong Shin, Eun Mi Lee, Do Sik Shim*, Ki Yong Lee, Myoung Ho Kim, “Study on the Mechanical Characteristics of a Deposited Tool Steel Layer Deposited using Direct Energy Deposition,” Metals and Materials International (IF 1.889), vol. 23, no. 4, 770-777

Link

[Corresponding author]
Eun Mi Lee, Gwang Yong Shin, Do Sik Shim*, “Study of the effects of process parameters on deposited single track of M4 powder based direct energy deposition,” J. of Mechanical Science and Technology (IF 1.128) vol. 31, no. 7, 3411-3418

Link

[First/Corresponding author]
Do-Sik Shim*, Jong-Youn Son, Eun-Mi Lee, Gyeong-Yun Baek, “Improvement strategy for edge waviness in roll bending process of corrugated sheet metals,” Int. J. of Material Forming (IF 1.978), vol. 10, no. 4, 581-596

Link

[First/Corresponding author]
Do-Sik Shim*, Gyeong Yun Baek, Seul-Bi Lee, Jae-HyunYu, Yoon-Suk Choi, Sang-Hu Park, "Influence of heat treatment on wear behavior and impact toughness of AISI M4 coated by laser melting deposition," Surface and Coating Technology, vol. 328, 219-230

Link

[Corresponding author]
Gyeong Yun Baek, Ki Yong Lee, Sang Hu Park, Do Sik Shim*, "Effects of Substrate Preheating During Direct Energy Deposition on
Microstructure, Hardness, Tensile Strength, and Notch Toughness," Metals and Materials International, vol. 23, no. 6, 1204-1215

Link
2016

[First/Corresponding author]
Do-Sik Shim*, Gyeong-Yun Baek, Jin-Seon Seo, Gwang-Yong Shin, Kee-Poong Kim, Ki-Yong Lee, “Effect of layer thickness setting on deposition characteristics in direct energy deposition (DED) process,” Optics & Laser Technology (IF 2.109), vol. 86, pp.69-78

Link

[First/Corresponding author]
Do-Sik Shim*, Kee-Poong Kim, Ki-Yong Lee, “Double-stage forming using critical pre-bending radius in roll bending of pipe with rectangular cross-section,” J. of Materials Processing Technology (IF 3.147), vol. 236, pp.189-203

Link

[Corresponding author]
Eun-Mi Lee, Do-Sik Shim*, Jong-Youn Son, Gyeong-Yun Baek, Hi-Seak Yoon, Kyoung-Bo Ro, “Study on design of progressive dies for manufacture of automobile structur-al member using DP980 advanced high strength steel,” J. of Mechanical Science and Technology (IF 0.838), vol. 30, no. 2, pp.853-864

Link

[First/Corresponding author]
Do-Sik Shim*, Gyeong-Yun Baek, Gwang-Yong Shin, Hi-Seak Yoon, Ki-Yong Lee, Kwang-Ho Kim, “Investigation into the Tension Force in the Stretch Forming of a Doubly Curved Aluminum Alloy (Al5083) Sheet,” Int. J. of Precision Engineering and Manufacturing (IF 1.205), vol. 17, no. 4, pp.1-13

Link
2015

[Corresponding author]
Gyeong-Yun Baek and Do-Sik Shim*, “FE Simulation-based Process Design for Manufacturing Structural Members of Commercial Vehicle using Pipes with Rectangular Cross-Sections,” Int. J. of Precision Engineering and Manufacturing (IF 1.205), vol. 16, no. 4, pp.723-733.

Link
2014

[First/Corresponding author]
Do-Sik Shim*, Dong-Yol Yang, “Simplified Equations for Springback Compensation in the Manufacture of Pressure Vessel Shells with Double Curvatures Using Line Array Roll Set Process,” Int. J. of Pressure Vessels and Piping (IF 1.283), under review

Link

[First/Corresponding author]
Do-Sik Shim* and Dong-Yol Yang, “Multi-Stage Forming using Optimized Preform in the Line Array Roll Set Process and Its Industrial Application,” Int. J. of Precision Engineering and Manufacturing (IF 1.205), vol. 15, no. 10, pp.2085-2092.

Link
2013

[First/Corresponding author]
Do-Sik Shim*, Dong-Yol Yang, Don-Jin Lee, Myoung-Soo Han, “Development of Process Design Program for Manufacture of Desired Shapes using Line Array Roll Set (LARS) Process,” Int. J. of Precision Engineering and Manufacturing (IF 1.205), vol. 14, no. 8, pp.1501-1504

Link
2011

[First/Corresponding author]
Do-Sik Shim*, Dong-Yol Yang, Don-Jin Lee, Myoung-Soo Han, Myoung-Suk Ko, “Investigation into the Process Design for the Manufacture of Doubly Curved Plates in the Incremental Roll Forming Process and its Experimental Verification,” Steel research international 2011 (IF 1.118), Special Edition, pp. 373-378

Link
2010

[First author]
D.S. Shim, D.Y. Yang*, K.H. Kim, S.W. Chung, M.S. Han, “Practical design equations for cold roll forming of doubly-curved hull plates by using line array roll set (LARS)” J. of Ship Production and Design, vol. 26, no.3, pp.177-186

Link

[First author]
Do-Sik Shim, Dong-Yol Yang*, Sung-Wook Chung, Myoung-Soo Han, “Optimization of forming steps in the incremental forming of twisted shapes using a line array roll set (LARS),” Int. J. of Precision Engineering and Manufacturing (IF 1.205), vol. 11, no.5, pp.715-723

Link

[First author]
D.S. Shim, D.Y. Yang*, K.H. Kim, M.S. Han, S.W. Chung, “Investigation into forming sequences for the incremental forming of doubly curved plates using the line array roll set (LARS) process” Int. J. of Machine Tools and Manufacture (IF 3.037), vol. 50, issue 2, pp. 214-218

Link
2009

[First author]
D.S. Shim, D.Y. Yang*, K.H. Kim, M.S. Han, S.W. Chung, “Numerical and experimental investigation into cold incremental rolling of doubly curved plates for process design of a new LARS(Line Array Roll Set) rolling process,” CIRP Annals- Manufacturing Technology (IF 2.542), vol. 58, issue 1, pp. 239-242

Link